Power Control Centres

We are offering power control centres.
electro controls and devices is one of the jubilant power control panel manufacturers and electrical control center suppliers, based in india. The manufacturing of our power control center is based upon several technical specifications. Its performance and longevity is simply unmatched. Lastly, we offer our power control center at most competitive prices.
we are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features:
panels will be suitable for 415 ± 6% volt, 3 phase (4 w + e) 50 hz ac supply
they will be installed indoors and will work efficiently up to an ambient temperature of 50°c
all doors will be suitably labeled and marked for convenience of operation & maintenance.
construction
modular design
free standing
floor mounting type using 2.0/1.6 mm crca sheet.
the complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired.
finish
the entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements.
bus bars & internal wiring
uniform cross section copper bus bars (current density 1.39 amps/sq mm.) supported by smc /dmc bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade pvc insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles earthing bus bars will be running all along the board.
switch gears/ components
along with the formal offer, the ga drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.
standards
ours panels conform to the standards such as, is 4237; is 8623; is 375
switch gears/ components
along with the formal offer, the ga drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.