Temperature Data Loggers

Temperature recorders for the transport, storage and distribution of chilled, frozen,deep-frozen/quick-frozen items.

Data loggers are designed for recording of temperature only or temperature in combination with other signals. Values are stored to a non volatile memory. Data transfer to the PC is performed via serial interface USB, RS232 or Ethernet by means of proper adapter
or GSM modem.

Advantages:
- included traceable calibration certificate
- fast data transfer to the PC – full memory of 32 000 readings in approximately 30s
- variability of connection to the computer – USB, RS232, Ethernet, GSM modem
- permanent connection to the PC enabled, data is possible to download even during logging
- large dual line display with special symbols
- optional display of minimum and maximum measured values (reset of min/max memory from PC or
by magnet)
- dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display or LED.
- two alarm modes: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared)
- robust watertight case, easy installation, locking enabled
- low power consumption – battery life up to 7 years, indication of remaining battery life, easy battery replacement
- standard temperature sensor is Pt1000, switchable to Ni1000/6180ppm at range -50 to +150°C
- models S0841 and S0842 are able to combine temperature measurement with logging of contact state e.g. Door contact
- logging start/stop is enabled in several ways: at certain time and date programmed from computer, by magnet or depending on binary input state (S0841 & S0842 models)
- also special logging mode is enabled when logging runs only, if some of measured values are out of adjusted alarm limits
- each logger can describe with text - maximum of 32 characters
- each channel can describe with text - maximum of 16 characters
- password protection is enabled to prevent unauthorised manipulation with logger