NexGen Roorkee Industries

Roorkee, Uttarakhand

A barometric logger is used to automatically compensate readings stored on the dipperLog data logger for changes in barometric pressure (for non-vented version). The Heron barLog is recommended for long term monitoring or where more than one logger is deployed within a 5km/3mi radius. The barLog has a capacity for 128, 000 data points, with the capability to choose reading intervals in the easy to use dipperLog software.

• Download Speed: 21, 333.33/min
• Water Level Accuracy (Typical): +/- 0.05%FS (0°C to 50°C)
• Temperature Accuracy (Typical): +/- 0.05°C
• Overpressure Rating: 2X Factory Calibrated Range
• Operating Temperature: -20°C to 80°C (5°F to 175°F)
• Pressure Resolution %FS: 0.001
• Battery life: Up to 5, 000, 000 readings / 15 years
• Warranty: 3 years
• O-Ring Primary: Buna-N
• O-Ring Backup: Viton
• Transducer: 316 SS Piezoresistive Silicon

The RainLogger is a complete integrated system for monitoring rainfall. The tipping bucket rain gauge is calibrated to 0.01 inches / 0.25 mm per tip. Other calibrations are available on request.

Features

• RainLog data logger
• RL-Loader 2 software
• Rain collector
• Mounting mast

RL-Loader 2 – Software (Free)

This free Windows-based software package will run on Windows XP or later. RL-Loader is used to configure and download data from the RainLog. Data is displayed in both text and graphical formats and can be printed or exported directly into Microsoft Excel. The device info window gives you vital information about the RainLog, such as time, date, and amount of memory used. The text window displays daily totals or the list of rainfall events as they occur. The graph window displays a bar chart of the daily rainfall totals with a configurable graphing range.

TheReel Modelis an ideal option when transporting your data logger from site to site for pump and slug tests or any other short term deployment. Programming and downloading of the data is capable via the connection on the face plate on the reel.

TheReel Modelis an ideal option when transporting your data logger from site to site for pump and slug tests or any other short term deployment. Programming and downloading of the data is capable via the connection on the face plate on the reel.

Description
The CR310 is a multi-purpose, compact, low-cost measurement and control datalogger that includes an integrated 10/100 Ethernet port and removable terminalconnectors. This entry-level data logger, with its rich instruction set, can measuremost hydrological, meteorological, environmental, and industrial sensors. It willconcentrate data, making it available over varied networks and deliver it using yourpreferred protocol. The CR310 also performs automated on-site or remote decisionmaking for control and M2M communications. The CR310 is ideal for smallapplications requiring long-term, remote monitoring and control.

The Acclima DataSnap is the simplest stand-alone SDI-12 universal data logger available on the market today. While simple to use, it is has powerful features and functionality.

The DataSnap is first and foremost an SDI-12 data logger, accommodating up to ten SDI-12 soil moisture sensors. The DataSnap is compatible with all soil water content sensors that communicate using the SDI-12 protocol. It sets a new standard for ease of use. Just connect an SDI-12 sensor and click a button. It requires no SDI-12 programming knowledge. Adding Acclima’s world-renowned and highly accurate soil moisture probes is even easier as the DataSnap will find all attached Acclima sensors with the click of a button.

The DataSnap, with its companion Windows® software, SnapView, allows a user to easily take manual readings at any time. SnapView also simplifies DataSnap configuration and synchronization via USB. It can manage multiple DataSnap connections and retrieve real-time sensor data from each. SnapView provides options for viewing data in table or graph formats. Data is easily exported for use in other analytical applications. SnapView is compatible with any Windows® PC (XP or newer).

Key Features
• Accommodates up to ten SDI-12 sensors
• Requires no SDI-12 programming knowledge
• Includes SnapView software for Windows PCs
• USB to SDI-12 bridge
• Supports an included 12V power adapter
• Supports an included 12V battery pack (eight AA batteries NOT included)
• Short circuit protection
• Supports third-party software development
• Data logging of first five data points with the SDI-12 M! command
• Total memory capacity supports over 59, 000 scans with each scan storing up to five data points
• Compatible with all sensors that use the SDI-12 protocol
• Compatible with terminal software applications, like HyperTerminal or PuTTy
• Very low power operation for long battery life
• High value for low cost

DescriptionThe CR350 is a low-powered data logger designed to measure sensors, analyzedata, and store data and programs. A battery-backed clock assures accuratetimekeeping. The on-board, BASIC-like programming language—common to allCampbell Scientific data loggers—supports data processing and analysis routines.

Terminal Descriptions

 - Two switched 12 V terminals (SW12V) for powering sensors or communication devices, 2100 mA

 - Two sensor excitation or continuous 0.15 to 5 V terminals (VX1, VX2) for sensor excitation or output control

 - Four multipurpose analog input terminals (SE1–SE4)

 - Analog functions (SE1–SE4)

- Analog inputs: 4 single-ended or 2 differential inputs with -100 to +2500 mV and ±34 mV ranges 24 bit ADC

 - 4 to 20 mA or 0 to 20 mA inputs (SE1, SE2 only)

 - Digital I/O functions (SE1–SE4) consist of 3.3 V logic levels for:

 - High frequency counter (35 kHz)

- Pulse width modulation 

Solar-powered SDI-12 data recorder (data logger) with rechargeable Lithium-ion cell. Housed in UV weather resistant polycarbonate enclosure. Takes over 53, 000 5-data point scans before it overwrites the oldest data. A micro USB cable, 45° PVC neck with terminal adapter, solar panel, and SDI-12 terminal plug are included.

Add to Cart

The Acclima Solar DataSnap is a simple-to-use standalone SDI-12 universal data logger with powerful features. It has a rugged, weather resistant, polycarbonate enclosure (NEMA 4) with a solar panel circuit that charges a lithium ion 18650 battery ensuring continuously reliable, long-term data logging.  It is designed to work with Acclima’s world renowned soil water content TDR and TDT SDI-12 sensors. It will also work with a wide range of third-party SDI-12 soil moisture sensors (probes or meters).

The Solar DataSnap will automatically detect and configure Acclima sensors with the click of a button in its free, downloadable Windows® software known as SnapView . This software allows a user to easily configure reading intervals for up to ten SDI-12 sensors. It will also work with a wide range of third-party SDI-12 sensors. It supports up to five data points per sensor (using the SDI-12 M! command). The software can synchronize data from multiple DataSnaps down to a Windows® PC through a USB connection with the Solar DataSnap. Data is easily exported for use in the form of CSV files which are are automatically generated and downloaded to a micro-USB thumb drive.

Key Features

• Accommodates up to 10 SDI-12 sensors
• Requires no SDI-12 programming knowledge
• Includes SnapView for Windows® PCs
• USB to SDI-12 bridge
• Short circuit protection
• Data logging of the first five data points with SDI-12 M! command
• Lithium-ion 18650 battery recharges withsolar power
• Long-lasting rechargeable battery (3500 mAh, 3.7v)
• Battery power monitoring feature from SnapView
• Battery power low warning flash on power-up(green LED then red LED)
• Total memory capacity supports over 59, 000scans with each scan storing up to five data points
• SDI-12 sensor compatibility
• Compatible with terminal software applications, like HyperTerminal or PuTTy
• NEMA 4 rated weather-UV resistant enclosure
• Operating temperature range: -20 C to +50
• 1.25 lbs. 6.5″x 6.5″x 3.7″ without conduit

This is our most economical deployment for an absolute data logger. Install the logger using a suspension cord and simply pull the logger up, connect to a laptop or tablet with a P.C. Communication Cable and retrieve your data.

dipperLog 128+

• 2 Year Warranty
• Available in All Pressure Ranges
• 128, 000 Pressure & Temperature Data Sets
• Expected Battery Life Up To 15 Years

dipperLog TOUGH+

• 2 Year Warranty
• Available in All Pressure Ranges
• 128, 000 Pressure & Temperature Data Sets
• Titanium Body
• Teflon™ Encapsulated O-Rings
• Suitable for Use in the Most Caustic & Hazardous Environments
• Expected Battery Life Up To 15 Years

The WATERMARK Monitor is our stand-alone data logger, providing users with a reliable, simple, and effective means of collecting information in the field. As well as recording data, the display on the Monitor and can be used to view readings at any time for spot checking conditions.
The Monitor records soil moisture, soil temperature, irrigation on/off status, and rain gauge counts for an accurate record of the performance of your irrigation schedule. Either Watermark 200SS sensors or RSU-V equipped IRROMETER tensiometers can be used to collect soil moisture data.
Information can be downloaded directly to a computer via on-board USB port with the included WaterGraph software, which also includes graphing features for visualization. Downloaded data is stored in a CSV file which can also be accessed by spreadsheet or text editing programs.

Device Features:
Selectable reading interval8 sensor capacityFlexible sensor configurationWaterGraph Software includedIn-field display of current and recent readingsOutdoor mount waterproof enclosureUSB Connectivity

The WindLog is a compact wind data logger designed to accurately measure and record wind speed, direction, and gust for optimizing turbine placement and performance. Includes WindSoft free software package to generate statistics, graphs, and reports.

The WindLog samples data every second and stores both average and gust readings at the user-selected interval. User selectable logging intervals range from 1-minute to 1-hour.

The 2 MB memory can record for over three months at a 1-minute rate and store over a years worth of wind data at a 10-minute logging interval.

The Mini-Aervane wind sensor is equipped with low friction race bearings. This reduces the threshold to approximately 1 mile per hour. Wind extension cables that separate the wind sensor from the WindLog are available in50-footor100-foot length. The wind direction sensor has a 16-point resolution. Logged direction readings are averaged readings.

The data logger operates on 3 AA Alkaline or Lithium batteries. Batteries are not included. Lithium batteries are recommended for cold environments. The typical life should be around six months. When connected to a computer, the WindLog will use the USB ports power to run, further extending the battery life. The WindLog ships with a 15-foot USB cable. AUSB extenderis available that will allow you to extend this cable to 100-foot using CAT5e network cable.

Each WindLog ships with a free Windows-based application, WindSoft. The software uses an SQLite database to track and record wind information. While connected, WindSoft will update the database every minute. Downloaded data is integrated into the database. By combining both logged and real-time data, the WindLog can be used both online and offline. It also can export CSV files for use with Microsoft Excel or any other application that supports CSV files.

The WindLog includes a support mast that can be used with the RainWise Mono Mount and Tripod. The mast may also be attached to a support structure using U-bolts or lag screws.

Features:

• 2MB flash memory data logger
• Mini-Aervane wind sensor
• WindSoft free software package
• Support mast
• 15-ft USB Cable

DownloadsFAQsReviewsBlog

Description
The Solinst LevelVent 5 is a vented version of our popular Levelogger®. The highly-accurate datalogger is designed to record water level and temperaturemeasurements during shallow groundwater and surface water deployments. 
The LevelVent 5 logger contains pressure and temperature sensors, a battery, memory for up to 150, 000 data logs, and hydrophobic filter within a 22 mm x 173 mm(7/8\" x 6.8\") stainless steel housing with a corrosion-resistant coating. 
The LevelVent uses a gauged pressure transducer; it is open to the atmosphere viaa vented cable to the wellhead. The compact LevelVent wellhead is designed to fit ina Solinst 2\" Well Cap Assembly, and provides easy connection for communicationaccessories.
The vented cable and Solinst LevelVent 5 logger are protected from moisture by permanent, built-in desiccants and hydrophobic filters in the logger and the wellhead.