The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.

The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature. Ordinary laboratory cement autoclave with mild steel chambers are also available.

INTRODUCTION

One of the categories of Autoclaves is the Pressure Cooker type. It is the orthodox design that has been carried forward. Though there are several modifications made in todays cooker type autoclaves.

Ramedicomanufactures these pressure cooker autoclaves that have been used at hospitals and clinics. They are used to sterilize dressing equipments. This also includes the surgical items which need to be properly sterilized before they can be used again.

The pressure cooker type autoclave is perfect to such usage as it is made p of stainless steel to give the desired sterilization temperature. The construction of these autoclaves is seamless which gives them an edge over primitive autoclaves. They also come with a thicker layering sheet and a rubber gasket for safe and hygienic use.

The device also comes with a pressure regulating meter which can be used to observe the pressure building inside the chamber. The equipment also has safety valves in case if the pressure onside the chamber exceeds an upper limit.

The handles and knobs of this autoclave are positioned at the right spots to make it easier to carry around. The flat base of the equipment makes it easier to place at any spot without worrying about its displacement due to pressure build-up.

INTRODUCTION

Autoclave High Pressure are equipments which are used to sterilize dressing and surgical instruments. This machines is used in on the principle of steam sterilization. The device is most commonly used there is a higher temperature that needs to be attained for the sterilization process.

Ramedico manufactures the Autoclave High Pressure machines with due care and intelligence. The products manufactured by us are safe and easy to use.

This High Pressure Autoclave has been designed with the ability to let the least amount of temperature loss. This has been achieved through the glass wool insulation which traps the heat inside the autoclave. The device also comes with the water level indicator. It also has a built in safety valve which ensures that the temperature or steam does not go beyond the prescribed standards. There is a pressure release steam valve which allows for the safe outflow of the steam created inside the autoclave.

Also the equipment is a vertical type which consumes less space and can be fitted with great ease.

INTRODUCTION

Autoclave accessories manufactured by Ramedico are of the finest quality. They are made up of the finest quality goods to ensure that they last for a longer duration of time. The equipments in this range are pressure meters, valves, tubes etc. which are required for the working of the autoclave.

Our autoclave accessories can be used with a large range of products. They can fit in with all standard autoclaves and thus find broad usage. They are designed to meet the required safety parameters. There are emergency safety procedures which turn off these autoclave accessories in case where the pressure of temperature exceeds the standard level.

INTRODUCTION

The autoclaves horizontal manufactured byRamedicoare made up of the finest quality and are laced with the highest safety measures. These equipments have a cylindrical horizontal shape which comes fitted with a boiler. The boiler is used to create the steam which is used to sterilize the medical and surgical equipments.

The device comes with safety measures that indicate the water level in the boiler to ensure safe usage. There is a cut off unit which cuts off the power supply in case where the water level is below the standard point. There are also safety measures for self locking of the equipment where there may be an accidental breakage.

The equipment is made up of stainless steel and it also has an inner glass layer to prevent any heat loss from the chambers. This makes the device more effective and preferable to use.

INTRODUCTION

Autoclave vertical are high end autoclaves that have been extremely useful in the sterilization process. The equipment comes in a vertical which makes it easy to store and operate at any place. Ramedico manufactures some of the best vertical autoclaves.

The design and body of the autoclave is made up of stainless steel with an Aluminium ring. This helps the device to sustain high pressure and temperature within its casket. This makes it suitable for sterilizing surgical and dressing instruments. The rubber gasket is another very important feature of the equipment. This keeps the device safe and easy to use.

With the safety valves, there are no chances of the equipment malfunctioning. This safety includes automatic cut off and stopping of all functions within the autoclave. The pressure and temperature meters make it easy to control the autoclaves inner environment. There is also steam release mechanism which lets the steam blow out easily without posing any damage to the equipment and its surroundings.

Another good feature of the vertical Autoclave is that it can both run on electricity and fuel. This makes the equipment usable even in case of a power failure. The stand of the device allows greater grip and makes it stand at one point without any physical displacement.