Our Product / Services
Our Complete range of products are Soil Testing Equipment, Asphalt Testing Equipment, STRENGTH OF MATERIAL LAB, Rockwell Hardness Tester and Brinell Hardness Tester.
This apparatus is used to determine Softening point of Bitumen. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia steel ball, drops a specified distance when heated under specified conditions.
SALIENT FEATURE: Loading accuracy: As high as + 1 % Speeds: Straining at variable speeds to suit wide range of materials Facilities for tests: Motor-driven threaded columns for quick and convenient adjustment of lower crosshead to facilitate rapid fixing of test specimen. Autographic recorder: Simultaneous roll autographic recorder supplied as standard to enable study of the behaviors of materials. Ideal Dia: High reading accuracy due to large size ideal design of dial. Large columns: Large effective clearance between columns enables testing of standard specimen as well as structures. Easy changeability: Easy change from plain to threaded and screwed specimens Simple & Safe: Simple to operate. Robust construction Chrome planted metal components Wide range of standard and special attachments accessories available.
SL-5 : Manual weight selection an Manual zero adjustment of Dial gauge SL-5A : Manual weight selection with Automatic zero setting dial Gauge SL-5B : Automatic weight selection with automatic zero setting dial gauge SL- 5C: Arrangement similar to SL 5B with one additional weight of 187.5 kg for Brinell tests SL- 5D: Arrangement similar to SL 5B with two additional weight of 187.5 kg and 250kg for Brinell tests on this machine small pin having dia 2mm can be tested as plunger is guided with a set of six bearings. SL- 5E : Rockwell Superficial Hardness Tester with automatic zero setting dial gauge, manual load selection. The major load are N scale besides all fifteen Rockwell Superficial scales. Can be used with this tester SL-5F : This model is double purpose Hardness Tester suitable for Both Rockwell & Rockwell Superficial hardness test. The Major load of 15, 30, 45, 60, 100 and 150 kg are applied.
The machine is designed with a Hydraulic Power pack and control circuit for effortless loading unloading operation. A dial gauge in from measures depth of ball penetration. This facilitates production testing within tolrance limits by comparison method
|Testing Table 200 mm Ã~||1 pc.|
|Testing Table 200 mm Ã~ with 'V' grove for
round jobs-10 to 80 mm dia
|Ball holder 5 mm||1 pc.|
|Ball holder 10 mm||1 pc.|
|Test block HB-5/750||1 pc.|
|Test block HB 10/3000||1 pc.|
|Brinell Microscope||1 pc.|
|Allen Spanner||1 pc.|
|Telescopic cover for elevating screw protection||1 set|
|Instruction Manual||1 book|
|Max load (kgf)||3000|
|Load range (kgf)||In stage of 250 kgf|
|Initial Load range (kgf)||250|
|Max. test height (mm)||410|
|Depth of throat (mm)||200|
|Size of base (mm)||670 x 370|
|Machine height (mm)||1127 mm|
|Nett. weight (Approx. Kg.||450 kg|
This is a brass tube approximately 53 cm long and 2.8 cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the tube near handle. Total sample collected at one time is 300 cm approximately.
We are offering hardness tester for determining the hardness number of mastic asphalt for flooring. It consist of an internally insulated cabinet to the base of which is fitted a water bath having two taps. The bath is heated by an immersion heater and the temperature is controlled with the thermostat at 35° +/- 0.5° c. A 6.5mm dia pin is loaded on the specimen by means of a lever to give a 31.7 kg weight. A dial gauge 0.01 x 25 mm is provided to record the penetration of pin into the specimen