Our Product / Services
Our product range comtains a wide range of Triaxial Cell, Rebar Detection System, floating carriage diameter measuring machine, Sand Pouring Cylinder and Motorized Gyroscope
The cell is useful for testing 38mm dia x 76mm high soil specimen. Transparent Perspex chamber with anvil and loading plunger, the cell is easily opened by releasing four nuts of the tie rods. It is leak proof up to 10kgcm.sq. Fluid pressure. An oil plug which can also be used as an air vent is provided for introducing a thin layer of oil over water. This provides effective sealing at the plunger for long duration tests. The cell is fitted with four sleeve packed valves of no volume change type on the base. These valves are used for cell pressure, pore water pressure, drainage or back pressure. The loading plunger of the cell has dial gauge rest. Loading pad made of Perspex for 38mm dia specimens. Pair of plain discs made of Perspex 38mm dia 6mm thick. Pair of porous stones 38mm dia specimen. Split sand former for 38mm dia specimen. Sheath stretcher for 38mm dia specimen. One dozen rubber sheaths for 38mm dia samples. For synthetic rubber 'o' rings for 38mm dia specimen. One plastic drainage tube.
POWER SUPPLY Power source 2 x 1.5 V AA (LR6) batteries Voltage range 3.6 V to 1.8 V CURRENT CONSUMPTION Power on, backlight off ~ 50 mA Power on, backlight on ~ 200 mA Sleep mode ~ 10 mA Power off 50 h Backlight on > 15 h TIME OUTS Sleep mode 30 s Auto shut down 120 s ZEAL. ENVIRONMENTAL CONDITIONS Temperature range -10º to 60º C (14º to 140º F) Humidity range 0 to 100% rH Protection class IP54 STANDARDS AND REGULATIONS APPLIED BS1881 part 204; DIN1045; SN 505 262; DGZfP B2.
The soil testing equipment is used for determination of the dry density of compact, fine, medium grained soils and for layers not exceeding 50cm thickness. A circular hole is dug into the ground, all the soil from within it collected, weighed and dried, and the hole back filled with a standard uniform sand or fine gravel, poured from a calibrated container for calculating the volume of hole. The complete apparatus consists of a Sand Pouring Cylinder fitted with Conical funnel and Shutter, Cylindrical Calibration Container, and a Metal tray with a central hole.
This is to demonstrate the relationship between applied torque and the rate and direction of rotation. This is motorized and mounted on a frame such that free to rotate about three perpendicular axis. This facilitates to observe the laws of stability and justification of equation.
INTRODUCTION The flowmeter is an important product which is used during the anesthesia administration. It is used to detect the amount of oxygen and anesthetic elements flowing into the patient. There are different meters manufactured by Ramedico which can fit into the corresponding cylinders. They can be fitted to control the movement of the gases that flow through the tubes. Also they can be easily removed and placed again without any effort. They can be easily mounted on the oxygen and nitrous oxide cylinders. Controlling the amount of flowing elements is easy with these flowmeters and the desired volume can be controlled through the knob.