Our Products
GAS MONITOR ( MODEL ATS 109TD EXP. PROOF )
FOR HYDROCARBONS/EXPLOSIVE, TOXIC GASES & OXYGEN.
H2, O2, CO, CO2, NO, NO2, SO2, H2S, NH3, CL2, E.O., BR2, F2, HCL, HF, HCN
LPG/CNG, HYDROCARBONS, VOC, ORGANIC SOLVENTS/VAPOURS.
Fast and accurate response.
Flexibility to fit your application needs
··
· Compatible for Marine Applicaions
Integral or Remote mounting Sensor.
Interfaces with Industry Standard Transmitters. ·
·
· Ingress Protection IP-65
Applied Field proven gas Monitor/Transmitters continuously monitors for dangerous
concentrations of gases. The linearize 4-20 mA transmission can interface directly with any
receiving instrument starting from indicators, controllers to large control systems.
Provision for directly connection of buzzer/Hooter for Alarm through Relay.
The standard system consist of a compact electronic module housed in a Weatherproof or
explosion proof Metallic or Polyester box with an application specific sensor. This state
of the art transmitter is carefully designed with and manufactured with Industrial grade
Components for reliability accuracy and long life. It is certified for use in hazardous
areas Class 1, Division 1, Group B, C & D. (IIA, IIB or IIC), IP 65 apart from being
available in weatherproof Enclosure Transmitters are equipped with micro controller and
are heavily featured with self diagnostics, Auto calibration (in case of toxic, Oxygen,
combustible gases only) through embedded Software, can be done at site. RS 232/485 output
with baud rates of 2400 bps is available as an options.
With Display Without Display
CSIR-CIMFR
Approved
DESCRIPTION
SPECIAL FEATURES
Applied Techno Engineers Pvt. Ltd.
An ISO 9001:2015 Company
Process Monitoring Instruments
Gases Oxygen Hydrocarbon, Hydrogen
%
LEL PPM %
Range 0 - 25/30/100 0-100% 0-1000/10000 0-100
D etection Principle Electrochemica l Catalytic Semiconductor Thermal
Combustion Electrochemica l Conductivity
Gases H2S CO So2 NO2 2 Br2, F2 HCL HCN NO NH3 E.O
Range PPM PPM PPM PPM PPM PPM PPM PPM PPM PPM
Max 2000 4000/10% 200 50 2000 200 200 1000 100/500 100
Min 0 0 0 0 0 0 0 0 0 0
De t e c t i o n P r i n c i p l e Application Based Electrochemical , Catalytic, Semiconductor or PID
Gas Monitor, Gas Analyzer, Transmitters, Humidity Moisture Dew Point Analyzer, Dew Point
Transmitters, Sampling Systems & Dust Particulate Monitor
Response Time
< 30 seconds
Zero drift
0.2% FS
Accuracy
+/- 1% FS (For Oxygen 0.5% FS)
Operating Voltage
24 Volt DC or 230VAC
Operating Temperature -20 to +60 Deg. C
Terminations
PCB mounted terminal blocks to accept 1.5mm wires
Display
7 Seg. LED Display
Output
4-20 mA Linear, Relay for diff levels /0 - 1Volts DC (V)/RS232/RS485
2wire (Dry Electrochemical sensor based, Dew point, Humidity, Temp,
Moisture, Vapour Pressure) , 3Wire Combustible, VOC’s, Toxic Gases
Power Consumption
2 wire: 0.5 W max. / 3 wire: 3.6 W max.
Max. Load
600 Ohms
Mounting
Wall mounting, 2" Pipe (U clamps will be provided)
Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria
for every product. Due to applied commitment to research, design and product improvement, specifications are subject to change without notice.
The Minimum & Maximum ranges & the Gases Indicated are Intended as a Guide for full scale detection.
VOC
PPM
100/1000
0
Housing Cast Aluminum Alloy (IP65)
Additional Information:
Payment Terms : T/T
Packaging Details : normal packing
PORTABLE GAS MONITOR/ANALYZER MODEL ATS-101M
model ATS-101M is Portable Single/Dubel Gas Detectors are capable
of detecting Oxygen, Toxic, and Combustible gases making them
ideal for use in various environments. Compact, Light Weight
Intelligent Unit with Application Specific Sensors Sensitive to
PPB / PPM or % levels of Gases & Vapors.
The advanced Micro controller technology employed makes these ALERT METERS highly dependable,
reliable and accurate. The complete automatic operation and calibration feature leaves no
scope for user error.
These Compact, self contained and intrinsically safe designed instrument housed in a weather
proof high impact plastic case are powered with a rechargeable Lithium 3.7V Dc battery.
On switching 'ON', the instrument goes thorough its complete self integrity check, and
displays factory set Warn and Alarm values before indicating ‘Ready’ for monitoring.
While in Operation, the instrument monitors the work place continuously giving the latest
update concentration of designated Gas through diffusion sampling. Suction sampling is
possible with an optional manual or battery operated pump and adaptor. The poison resistant
Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross
interference filters are gas specific. Optionally the sensors can be mounted on an extension
cable for monitoring inaccessible locations before entry.
The instruments emits an audible beep every 15 secs that provides confidence to the user that
he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous
situations.
The Warn and Alarm Values are factory set. Low Battery Alarm alerts the user to replace or
recharge the Battery. Special features like maximum exposed concentration and TWA readings
can be incorporated
Complete Automatic Operation.
128X64 Graphics Display
Continuous Diffusion / Suction Sampling
Confidence Beep every 15 seconds.
Complete self Integrity check on start
Automatic Calibration.
Display of WARN & ALARM
Low battery Alarm.
FEATURES
Sample Type: Diffussion
(Without auto suction pump)
Sample Type: Auto suction
(with inbuilt auto suction pump)
Applied Techno Engineers Pvt. Ltd.
An ISO 9001:2015 Company
Process Monitoring Instruments
FEATURES
Overall Ranges PPB / PPM / % V/V/% LEL
Sampling Method Diffusion (D) or Suction (S)
Principle Specific to Application (EC, NDIR, Solid State, Catalytic, PID)
Sensor Life 2 - 5 years
Measurement Continuous.
Display 128 X 64 graphics Display (Reading, Alarm Icon & low battery Condition)
Resolution 0.01, 0.1 or 1 PPM, %V/V, % LEL as applicable.
Accuracy +/- 2 % & 0.5% for oxygen.
Repeatability +/- 2 %.
Response Time < 30 seconds at 95 % variation.
Alarms Low & HI Visual and Audible (User Customized))
Humidity 0 - 9 5 % R H
Power Supply 3.7 V DC Long Life Lithium Rechargeable Battery
Battery Life 6-8 hours.
Housing & IP High Impact Plastic. (ABS), Ingress Protection:IP68
Size & Weight 115(H) X180(L) X 60(D); 300 GM.
Temperature Range -30 to 55 Deg. C.
Additional Information:
Payment Terms : T/T
Packaging Details : normal packing
Delivery Time : 1 Week
portable single/multi gas monitor ( model ats-103m )
introduction:-
portable and multi-gas detector simultaneously monitors and displays up to
five gases. the compact and field tough ats-103m features a non-intrusive
integrated sampling pump designed for performance, reliability and ease-ofuse.
it's optional data logging and computer interface features can be used for
further detailed analysis.
specification:-
gases detected : ch4/lel, o2, h2s, co
measuring range :
ch4: (0.005.00)%vol (optional)
lel: (0100)%lel
o2 : (030.0)%vol
h2s: (0100)ppm
co: (01000) ppm
resolution ratio : ch4: 0.01, lel: 1%lel, o2: 0.1%vol, h2s:1ppm, co: 1ppm
sensor : high quality catalytic sensor for lel
electrochemical sensor for h2s, co & o2
sensor lifetime : 2years
response time : ch4: 20s ( t90 ), lel: 20s ( t90 ), o2: 35s(t90),
h2s: 45s ( t90 ), co: 45s (t90)
alarms : audible--buzzer with 85db @1m audible
visible--flashing red led, 20m visible
vibration
alarm point : high and low, fully adjustable
temperature : -25 deg. c to +55 deg. c
continuous working time : 13hours
display : liquid crystal display(lcd)
battery : 3.7v/1500ma
charging time : 4-5 hours
dust and water resistance : ip67
size & weight : 136*70*37mm, 250g
options:-
on start up, the instrument automatically goes through complete self integrity check,
on demand. the press of sampling switch initiates the sampling through suction
analysis and digitally displays the results. hold key enables monitor/analysis for
a particularparameter of interest.
Additional Information:
Packaging Details : NORMAL PACKING
Delivery Time : 2 WEEKS
PORTABLE SINGLE/MULTI GAS MONITOR ( MODEL ATS-103M )
INTRODUCTION:
Portable and multi-gas detector simultaneously monitors and displays up to
five gases. The compact and field tough ATS-103M features a non-intrusive
integrated sampling pump designed for performance, reliability and ease-ofuse.
It's optional Data Logging and computer interface features can be used for
further detailed analysis.
SPECIAL FEATURES:
Automatic Operation
Self Diagnostic Check
Proven Sensor Technology
Continuous, Stable Alphanumeric
Display
Customized Visual & Sound Alarms
Suitable for use in hazardous area
Class-1, Div.-1, Groups A, B, C & D
Zone 0 of Gas Group IIC
Diffusion or Suction Sampling
Long Life Rechargeable Batteries
Data Logging and Rs 232 Output Capability
Operation modes: Real time always ready
Light weight, handy and simple to use
Sampling probe
CSIR-CIMFR Approved
SPECIFICATION:
Gases detected : CH4/LEL, O2, H2S, CO
Measuring range :
CH4: (0.005.00)%vol (Optional)
LEL: (0100)%LEL
O2 : (030.0)%vol
H2S: (0100)ppm
CO: (01000) ppm
Resolution ratio : CH4: 0.01, LEL: 1%LEL, O2: 0.1%vol, H2S:1ppm, CO: 1ppm
Sensor : High quality catalytic sensor for LEL
Electrochemical sensor for H2S, CO & O2
Sensor lifetime : 2years
Response time : CH4: 20S ( T90 ), LEL: 20S ( T90 ), O2: 35s(T90),
H2S: 45S ( T90 ), CO: 45s (T90)
Alarms : Audible--buzzer with 85dB @1m audible
Visible--flashing red LED, 20m visible
Vibration
Alarm point : High and low, fully adjustable
Temperature : -25 Deg. C to +55 Deg. C
Continuous working time : 13hours
Display : Liquid Crystal Display(LCD)
Battery : 3.7V/1500mA
Charging time : 4-5 hours
Dust and water resistance : IP67
Size & Weight : 136*70*37mm, 250g
Additional Information:
Packaging Details : Normal packing
Delivery Time : 2 WEEKS
Hydrogen Purity Analyzer Model ATS-202A
Applications :
Additional Information:
Payment Terms : T/T
Online Continuous Emission Monitoring Systems (OCEMS)
Make: Applied Techno Systems
Model: ATS 208A
Approval Certificate : TUV
With Remote calibration facility
Applied Techno Systems is Inginiuos manufacturer of OCEMS Model ATS 208A which includes Gas ANalyser, Gas Sampling Systems, Tempreture , flow & Opacity dust Monitoring Systems with real time data transmission Systems to CPCB & SPCB.
Applied Continuous Emission Montoring CEMS fullfill the environmental regulatory compliance of various industrieal sources of air pollutant.
Additional Information:
Payment Terms : T/T
Delivery Time : 2-3 Week
online so2 gas analyzer
we are indiginuous manufacture of onloine so2 analyzer model ats 208a
online continuous emission monitoring systems ocems
we are indiginuous manufacturer of online continuous stack emmission monitoring systems based on ndir technology with real time data connectivity to cpcb and spcb
approval : TUV
The New Generation features self Diagnostics, Smart operation and maintenance
Remote calibration and operation
Internet/ GPRS /LAN To Monitoring Centers
Additional Information:
Payment Terms : T/T
Packaging Details : wooden packing
Delivery Time : 2 week
portable gas detector
introdduction:
portable and multi-gas detector simultaneously monitors and displays up to
five gases. the compact and field tough ats-103m features a non-intrusive
integrated sampling pump designed for performance, reliability and ease-ofuse.
it's optional data logging and computer interface features can be used for
further detailed analysis.
special feature:
automatic operation
self diagnostic check
proven sensor technology
continuous, stable alphanumeric
display
customized visual & sound alarms
suitable for use in hazardous area
class-1, div.-1, groups a, b, c & d
zone 0 of gas group iic
diffusion or suction sampling
long life rechargeable batteries
data logging and rs 232 output capability
operation modes: real time always ready
light weight, handy and simple to use
sampling probe
csir-cimfr approved
specification:
gases detected : ch4/lel, o2, h2s, co
measuring range :
ch4: (0.005.00)%vol (optional)
lel: (0100)%lel
o2 : (030.0)%vol
h2s: (0100)ppm
co: (01000) ppm
resolution ratio : ch4: 0.01, lel: 1%lel, o2: 0.1%vol, h2s:1ppm, co: 1ppm
sensor : high quality catalytic sensor for lel
electrochemical sensor for h2s, co & o2
sensor lifetime : 2years
response time : ch4: 20s ( t90 ), lel: 20s ( t90 ), o2: 35s(t90),
h2s: 45s ( t90 ), co: 45s (t90)
alarms : audible--buzzer with 85db @1m audible
visible--flashing red led, 20m visible
vibration
alarm point : high and low, fully adjustable
temperature : -25 deg. c to +55 deg. c
continuous working time : 13hours
display : liquid crystal display(lcd)
battery : 3.7v/1500ma
charging time : 4-5 hours
dust and water resistance : ip67
size & weight : 136*70*37mm, 250g
on start up, the instrument automatically goes through complete self integrity check,
on demand. the press of sampling switch initiates the sampling through suction
analysis and digitally displays the results. hold key enables monitor/analysis for
a particularparameter of interest.
Additional Information:
Packaging Details : Normal packing
Delivery Time : 2 WEEKS
Features :
Other Details :