We, at our company provide our customers with a range of high performance automatic power factor corrector panel which is manufactured respecting the standards. The panels we make are exceptional because of its high grade materials and world class technology. The panels consists of banking pattern that is helpful for the development of the desired power factor for all kinds of loads and automatic control switch which maintains the load power factor for all kinds of load power factor by the sensing diverse parameters. The contacts that we made use of in the capacitor bank circuits are ideal for capacitor switching duties that is able to resist large transient current peaks at high frequencies. The contactors used here amplify of an operational life of 100000 switching conditions. The thyristor modular based APFC panel is available here too. For an individual capacitor steps, we offer three phase high rapture capacitor fuses. The fuses are fabricated according to the rules of modern industrial design with current limiting capacity of 100 kA. A broad range of APFC panels with 6, 8 and 14 stages of controllers also available at here.

• Rated Insulation Voltage: 0-780 Volt AC
  Rated Operator Voltage: 110V (+/-10%), 220V (+/-10%) 415V (+/-10%) AC,
• System: 3-ph, 3 or 4 wire
  Withstand voltage: 8 KV for 1 Sec
• Rated Current: 100-1000Amp
• Fault level: 50KA for 1 Sec
• Ambient Temperature: 45°C
• Busbar Support: AL/CU as per client requirement
• Method of Cooling: Natural Process
• Degree of protection: IP-42, 54, 67
• Switching: Contractor or Thyristor
• Dimension (mm): As per requirement
• Current Monitoring: As per requirement
• Phase Monitoring: Possible as per requirement
• Cable Entry: Top or Bottom
• Type test to be performed: Short Circuit with Stand temperature rise with stand & Degree of Protection
• Panel Cote: 7 tank Powder Coated Paint or as per Client’s requirement.
• Paint: RAL9002 or as per client requirement
• Panel Mounting: Floor / Ground Mounted, Wall Mounted, Mounted on Angle Frame

We, at our company provide our customers with a range of high performance automatic power factor corrector panel which is manufactured respecting the standards. The panels we make are exceptional because of its high grade materials and world class technology. The panels consists of banking pattern that is helpful for the development of the desired power factor for all kinds of loads and automatic control switch which maintains the load power factor for all kinds of load power factor by the sensing diverse parameters. The contacts that we made use of in the capacitor bank circuits are ideal for capacitor switching duties that is able to resist large transient current peaks at high frequencies. The contactors used here amplify of an operational life of 100000 switching conditions. The thyristor modular based APFC panel is available here too. For an individual capacitor steps, we offer three phase high rapture capacitor fuses. The fuses are fabricated according to the rules of modern industrial design with current limiting capacity of 100 kA. A broad range of APFC panels with 6, 8 and 14 stages of controllers also available at here.

• Rated Insulation Voltage: 0-780 Volt AC
  Rated Operator Voltage: 110V (+/-10%), 220V (+/-10%) 415V (+/-10%) AC,
• System: 3-ph, 3 or 4 wire
  Withstand voltage: 8 KV for 1 Sec
• Rated Current: 100-1000Amp
• Fault level: 50KA for 1 Sec
• Ambient Temperature: 45°C
• Busbar Support: AL/CU as per client requirement
• Method of Cooling: Natural Process
• Degree of protection: IP-42, 54, 67
• Switching: Contractor or Thyristor
• Dimension (mm): As per requirement
• Current Monitoring: As per requirement
• Phase Monitoring: Possible as per requirement
• Cable Entry: Top or Bottom
• Type test to be performed: Short Circuit with Stand temperature rise with stand & Degree of Protection
• Panel Cote: 7 tank Powder Coated Paint or as per Client’s requirement.
• Paint: RAL9002 or as per client requirement
• Panel Mounting: Floor / Ground Mounted, Wall Mounted, Mounted on Angle Frame