Conductivity Controller

We are offering conductivity controller.
This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It has control function, including setting of over limit of conductivity, and the outputs are control contacts. It’s an ideal auxiliary instrument of various types of small pure water equipment
sepicification:
measurement range:
0~20, 0~200, 0~2000 (μscm) optional
accuracy 1.5% (fs)
stability ±2 × 10-3 (fs) 24h
display mode back light 3.5 lcd digital display
auxiliary electrode 1.0cm-1 plastic electrode
thread dimension 12″pipe thread
control output mode single relay contact (normally open)
contact capacity 5a250v ac ( with resistive load)
environment conditions
temperature: 0~50; relative humidity: ≤85%
temperature compensation
automatic compensation with 25 as the reference temperature.
Cable length 5m or on other agreement (5~30m)
temperature compensation
automatic compensation with 25 as the reference temperature
power supply ac 220v ±10% 50hz
cable composition rvp+coaxial 75-2 double shielding
operation pressure of conductance cell 00.5mpa
cable length 5m or on other agreement
dimensions 48 × 96 × 100mm (height × width × depth)
slot dimensions for installation 45 × 91mm (height × width)