The Vibrating Rod Level Switch is aneconomical choice in level detection of powdersand bulk solids. The Vibrating Rod LevelSwitch built with a piezoelectric crystals thatvibrates the rod at a natural frequency. Once therod comes in contact with the material, thevibration will be damped and the switch willchange its state. Once the rod is uncovered bythe material, the switch will revert to its normalstate. Best for silo or hopper applications, itsprobe design allows for self-cleaning, ensuringno build-up or bridging of material andaccurate detection. Sensitivity is adjustable fordetection ranging from large granular materialto small powders with low bulk densities. Thefailsafe mode can be set for failure on high levelor failure on low level using a selector switch ininstrument.Applications:Flakes, Grains, Coal Powder, cereals, sugar,animal feed, milk powder, flour, insulation,cement, plastic granules, saw dust, woodchips carbon black, light fibres, detergentpowders, dyes, chalk, silica,
Salient Features: Compact size with integral electronics No calibration required, so plug and play No moving parts so no wear and tear Universal Power supply for AC IDC operation Relay or open collector PNP outputs availableRigid and sturdy design @ 250mm Available in 1&1/2 inchandabove screwed mounting standards IP 68 ingress protection Field Selectable fail safe mode LED indicators for status, alarm and normal operation Selectable Density setting and switching delay.
Rigid and sturdy design @ 250mm Available in 1&1/2 inchandabove screwed mounting standards IP 68 ingress protection Field Selectable fail safe mode LED indicators for status, alarm and normal operation Selectable Density setting and switching delay
Specifications:Mechanical:Housing: Cast Aluminium IP 68TYPE: Integral with probe with ElectronicsCableEntry: PG 13.5CableGland: Single compression PG13.5Process Connection: 1&1/2" male BSP Std. NPT/ Sanitary/flanged on request.MountingIPipeextensionM.O.C.: SS304/SS316asperrequirementTuning Rod: S316Process conditions:Pressure Limit: 150 psi (10 bar).Sensitivity: Min. bulk density of 10 lb/ft3 (160 kg/m3).Temperatures: Ambient: -40 to 140°F (-40 to 60°C);Process: -40 to 176°F (-40 to 80°C).Electronics:Power supply: 20 to 270 V AC 5O Hz and 18 to 55 V DCPower consumption: 10 VA Max.Out Put: SPDT/DPDT Relay/Relay output: Potential .free change overcontacts rated at 6A 230 V AC SO HzElectrical Connections: Screw terminalsResonant frequency of fork: 350 Hz approx.Switchingdelay: Adjustable up to 20 sec. for Rod covered oruncovered conditionFailsafe condition:High ILow field selectable.Sensitivity:Fieldselectable

The Vibrating Rod Level Switch is aneconomical choice in level detection of powdersand bulk solids. The Vibrating Rod LevelSwitch built with a piezoelectric crystals thatvibrates the rod at a natural frequency. Once therod comes in contact with the material, thevibration will be damped and the switch willchange its state. Once the rod is uncovered bythe material, the switch will revert to its normalstate. Best for silo or hopper applications, itsprobe design allows for self-cleaning, ensuringno build-up or bridging of material andaccurate detection. Sensitivity is adjustable fordetection ranging from large granular materialto small powders with low bulk densities. Thefailsafe mode can be set for failure on high levelor failure on low level using a selector switch ininstrument.Applications:Flakes, Grains, Coal Powder, cereals, sugar,animal feed, milk powder, flour, insulation,cement, plastic granules, saw dust, woodchips carbon black, light fibres, detergentpowders, dyes, chalk, silica,
Salient Features: Compact size with integral electronics No calibration required, so plug and play No moving parts so no wear and tear Universal Power supply for AC IDC operation Relay or open collector PNP outputs availableRigid and sturdy design @ 250mm Available in 1&1/2 inchandabove screwed mounting standards IP 68 ingress protection Field Selectable fail safe mode LED indicators for status, alarm and normal operation Selectable Density setting and switching delay.
Rigid and sturdy design @ 250mm Available in 1&1/2 inchandabove screwed mounting standards IP 68 ingress protection Field Selectable fail safe mode LED indicators for status, alarm and normal operation Selectable Density setting and switching delay
Specifications:Mechanical:Housing: Cast Aluminium IP 68TYPE: Integral with probe with ElectronicsCableEntry: PG 13.5CableGland: Single compression PG13.5Process Connection: 1&1/2" male BSP Std. NPT/ Sanitary/flanged on request.MountingIPipeextensionM.O.C.: SS304/SS316asperrequirementTuning Rod: S316Process conditions:Pressure Limit: 150 psi (10 bar).Sensitivity: Min. bulk density of 10 lb/ft3 (160 kg/m3).Temperatures: Ambient: -40 to 140°F (-40 to 60°C);Process: -40 to 176°F (-40 to 80°C).Electronics:Power supply: 20 to 270 V AC 5O Hz and 18 to 55 V DCPower consumption: 10 VA Max.Out Put: SPDT/DPDT Relay/Relay output: Potential .free change overcontacts rated at 6A 230 V AC SO HzElectrical Connections: Screw terminalsResonant frequency of fork: 350 Hz approx.Switchingdelay: Adjustable up to 20 sec. for Rod covered oruncovered conditionFailsafe condition:High ILow field selectable.Sensitivity:Fieldselectable