Other Products / Services #3677467

What they will gain:

Higher Effectiveness and Efficiency on their Job

Excellent Career Enhancement Opportunity

Internationally Recognized Qualification

Photo-identity Card from ASCB(Europe) Ltd. - UK

Listing among an International list of Quality Professionals.

ASCB(UK) Accreditated unique features of the Six Sigma Executive level programs are:

• Process Improvement tools will be taught in a very simple and effective manner for real application and there will be no fancy jargon and statistics.
• All the tools are taught with respect to Shop floor (Gemba) application.
• A compilation of the case studies will be given as part of the course material for easy understanding of the tools.
• Group of participants is expected to complete "One" Process Improvement Projects after completion of course using the tools taught. Participants will be provided support through e-mail and phone in their Projects.
• There will be written test that will be conducted at the end of the course to ensure that the participants have fully understood all the tools.

DCS will issue a Executive level program Certificate to successful candidates.

For Description refer to attached PDF file

ISO 10002:2004 provides guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance and improvement. The complaints-handling process described is suitable for use as one of the processes of an overall quality management system.
ISO 10002:2004 is not intended to change any rights or obligations provided by applicable statutory or regulatory requirements
ISO 10002:2004 is not applicable to disputes referred for resolution outside the organization or for employment-related disputes.It is also intended for use by organizations of all sizes and in all sectors. Annex A provides guidance specifically for small businesses.
ISO 10002:2004 addresses the following aspects of complaints handling:

• enhancing customer satisfaction by creating a customer-focused environment that is open to feedback (including complaints), resolving any complaints received, and enhancing the organization''''s ability to improve its product and customer service

• top management involvement and commitment through adequate acquisition and deployment of resources, including personnel training

• recognizing and addressing the needs and expectations of complainantsproviding complainants with an open, effective and easy-to-use complaints process

• analysing and evaluating complaints in order to improve the product and customer service qualityauditing of the complaints-handling process
• reviewing the effectiveness and efficiency of the complaints-handling proces

Additional Information:

• Item Code: ISO10002
• Pay Mode Terms: T/T (Bank Transfer), D/A, Other
• Port of Dispatch: Mumbai

Adocument management system(DMS) is a system used to track, manage and store documents and reduce paper. Most are capable of keeping a record of the various versions created and modified by different users (history tracking). In the case of the management ofdigital documentssuch systems are based on computer programs. The term has some overlap with the concepts ofcontent management systems. It is often viewed as a component ofenterprise content management(ECM) systems and related todigital asset management, document imaging, workflowsystems andrecords managementsystems.

ISO 17987-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of LINbased vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication.

The LIN protocol supports the standardized service primitive interface as specified in ISO 142292.

ISO 17987-2:2016 provides the transport protocol and network layer services to support different application layer implementations like

ISO/IEC 17963:2013describes a Web services protocol based on SOAP for use in managementspecific domains. These domains include the management of entities such as PCs, servers, devices, Web services and other applications manageable entities. Services can expose only a WS-Management interface or compose the WS-Management service interface with some of the many other Web service specifications.

A crucial application for these services is in the area of systems management. To promote interoperability between management applications and managed resources, ISO/IEC PAS 17963:2012 identifies a core set of Web service specifications and usage requirements that expose a common set of operations central to all systems management. This includes the ability to do the following:

ISO/TS 16058:2004 addresses the technical and system components of the telehealth reference architecture for telelearning systems. It does so by defining technical requirements to be satisfied for a compliant telelearning system. A compliant system will help to ensure that the telelearning technologies deployed for healthcare telelearning are capable of appropriately supporting and delivering distance learning as well as interoperating with disparate telelearning systems that are also compliant with this specification.

SOAP Version 1.2 is a lightweight protocol intended for exchanging structured information in a decentralized, distributed environment. ISO/IEC 42020:2011 defines a set of adjuncts for use with the SOAP Version 1.2 messaging framework specified in ISO/IEC 42010:2011. ISO/IEC 42020:2011 depends on ISO/IEC 42010:2011.

ISO55000.ISO55000 is an international standard covering management of assets of any kind. Before it, a Publicly Available Specification (PAS 55) was published by the British Standards Institution in 2004 for physical assets. TheISO55000 series of Asset Management standards was launched in January 2014.

This standard is for all organizations working within the oil and gas industry supply chain. Certification to ISO/IEC/IEEE ensures standardization and improvement within the sector.

Energy management reduce your costs of energies by up to 25%

New standard EN ISO 50001:2011 energy management system.Due to the growing costs of energies and as a result of searching for a new solution within industry a new standard was introduced, focusing on energy management with the objective to reduce costs of companies and overall CO2emissions.

Potential of savings

Direct consumption of machines.Within industrial production an important source of savings consists of optimising energy consumption by production lines, machines and various other equipment. We focus on whether various machines and equipment are not running without use, whether their output is optimised, and whether they are properly adjusted.
Production technology.Another factor influencing energy consumption is optimisation of technological procedures which means that the same objective (namely a product of identical quality) can be achieved by changing the technological procedure with the objective of saving energies. This does not necessarily involve only the technological procedure itself but work organisation on shifts may be involved as well.
Energy consumption not directly related to production.Insufficient thermal insulation, lighting system, obsolete ventilation, inefficiently arranged places of work and other drawbacks within auxiliary processes are another potential source of savings.
Attitude of employees.Training and incentives in favour of employees in order to support meaningful savings provides companies with another positive effect when you consider all the invoices covering energy consumptions.

Information technology Security techniques Code of practice for information security controls based on ISO/IEC 27002 for cloud services

ISO/IEC 27017:2015 gives guidelines for information security controls applicable to the provision and use of cloud services by providing:

- additional implementation guidance for relevant controls specified in ISO/IEC 27002;

- additional controls with implementation guidance that specifically relate to cloud services.

This Recommendation International Standard provides controls and implementation guidance for both cloud service providers and cloud service customers.

IATF 16949:2016 is a specialized detail focused on the advancement of a quality administration framework which accommodates consistent improvement, underscoring deformity counteraction and the decrease of variety and waste in the car business production network and get together cycle. It depends on the ISO 9001 norm and the primary version was distributed in June 1999 as ISO/TS 16949:1999. IATF 16949:2016 supplanted ISO/TS 16949 in October 2016.

The standard was ready by the Global Auto Team (IATF) and the "Specialized Council" of ISO. It fits the country-explicit guidelines of value the executives systems.

Around 30% of the in excess of 100 existing motorcar makers follow the necessities of the standard however particularly the huge Asian producers have separated and have their own prerequisites for the quality administration frameworks of their corporate gathering and their providers.

A turnkey, a turnkey project, or a turnkey activity (likewise spelled turn-key) is a kind of task that is developed so it very well may be offered to any purchaser as a finished item. This is stood out from work to arrange, where the constructor assembles a thing to the purchaser's precise details, or when an inadequate item is sold with the presumption that the purchaser would finish it.

A turnkey task or agreement as depicted by Duncan Wallace (1984) is

. an agreement where the fundamental plan exudes from, or is provided by, the Project worker and not the proprietor, so the legitimate liability regarding the plan, reasonableness and execution of the work after fulfillment will be made to rest with the worker for hire . 'Turnkey' is treated as only implying the plan liability as the worker for hire's.

A Turnkey contract is commonly a development contract under which a worker for hire is utilized to plan, plan and fabricate a venture or a foundation and do some other fundamental improvement to make it utilitarian or 'prepared to use' at a concurred cost and by a fixed date.

In Turnkey contracts, more often than not the business gives the essential plan. The worker for hire should follow the essential plan given by the business.

A turnkey PC framework is a finished PC including equipment, working framework and application(s) planned and offered to fulfill explicit business prerequisites.

ISO 16059:2007 defines the elements of syntax, including the structure and associated content, for the purpose of coded data exchange and the need for harmonizing existing and future dentistry codification documents.

ISO/IEC 17998:2012 describes a framework that provides context and definitions to enable organizations to understand and deploy service-oriented architecture (SOA) governance.

ISO/IEC 17998:2012 defines:

• SOA Governance, including its relationship between Business, IT, and EA governance; this assists organizations in understanding the impact that the introduction of SOA into an organization has on governance;

SO/IEC 40180 provides the fundamentals and the reference framework for quality assurance, quality management and quality improvement in IT-enhanced learning, education and training (called E-Learning). It consists mainly of the Quality Reference Framework (QRF) for E-Learning, which is a common and generic framework to describe, specify and understand critical properties, characteristics and metrics of quality. The QRF combines an elaborated and extensive process model with a descriptive model for the processes. ISO/IEC 40180 harmonizes existing approaches, concepts, specifications, terms and definitions related to quality for E-Learning, education and training.

Human resourcesare the people who make up theworkforceof anorganization, business sector, oreconomy. "Human capital" is sometimes used synonymously with "human resources", although human capital typically refers to a narrower effect (i.e., the knowledge the individuals embody andeconomic growth). Likewise, other terms sometimes used includemanpower, talent, labour, personnel, or simplypeople.

A human-resources department (HR department) of an organization performshuman resource management, overseeing various aspects ofemployment, such as compliance withlabor lawand employment standards, administration ofemployee benefits, organizing of employees files with the required documents for future reference, some aspects ofrecruitmen

ISO 10668:2010 specifies requirements for procedures and methods of monetary brand value measurement.

ISO 10668:2010 specifies a framework for brand valuation, including objectives, bases of valuation, approaches to valuation, methods of valuation and sourcing of quality data and assumptions. It also specifies methods for reporting the results of such valuation.

ISO 10668 is a specification by the International Organization for Standardization (ISO) for the procedures and methods of measuring the value of a brand.

In 2007 ISO set up a task force to draft an International Standard on monetary brand valuation. After 3 years the ISO 10668^[1] Monetary Brand Valuation was released in Autumn 2010. This sets out the principles which should be adopted when valuing any brand.

ISO 10668 applies to brand valuations commissioned for all purposes, including:

• Accounting and financial reporting
• Insolvency and liquidation
• Tax planning and compliance
• Litigation support and dispute resolution
• Corporate finance and fundraising
• Licensing and joint venture negotiation
• Internal management information and reporting
• Strategic planning and brand management

The last of these applications include:

• Brand and marketing budget determination
• Brand portfolio review
• Brand architecture analysis
• Brand extension planning

Under ISO 10668 the brand valuer must declare the purpose of the valuation as this affects the premise or basis of value, the valuation assumptions used and the ultimate valuation opinion, all of which need to be transparent to a user of the final brand valuation report.

BS 25999wasBSI''''sstandard in the field ofBusiness Continuity Management(BCM). It was withdrawn in 2012 (part 2) and 2013 (part 1) following the publication of the international standards ISO 22301 - Societal Security Business continuity management systems Requirements and ISO 22313 - Societal Security Business continuity management systems Guidance

Upon its publication in 2007 BS 25999 replaced PAS 56, aPublicly Available Specification, published in 2003 on the same subject.

(C-TPAT) is a voluntary supply-chain security program led by U.S. Customs and Border Protection (CBP) focused on improving the security of private companies' supply chains with respect to terrorism. The program was launched in November 2001 with seven initial participants, all large U.S. companies. As of December 1, 2014, the program had 10, 854 members.^[1]The 4, 315 importers in the program account for approximately 54% of the value of all merchandise imported into the U.S.

Although the ISO 9000 Quality Standards have been welcomed by all industries in general, they are quite generic in nature. The Automotive Industry has realized that its requirements are much more stringent than the ISO 9000 standards. In 1988 Chrysler, ford and General Motor Corporation developed QS 9000 standard, which was accepted by ISO technical committee (TC 176) as TS 16949 automotive industry.

Our well developed process approach as well as rich industry experience also helps us in providing our customers highly effective Certification services for ISO 17025:2005. It is a leading international laboratory quality management system (QMS) standard. Further, ISO 17025:2005 is compatible with (but not equivalent to) ISO 9001:2000. ISO 17025 certification connects laboratory quality management system to all other laboratory processes.

The new requirements for achieving this certification include continual improvement of quality management system as well as improved communication with customers. Further, the Technical Requirements of 2005 revision are virtually unchanged.

An accredited ISO 17025 laboratory QMS will provide:

• Your assurance of meeting all customer quality requirements
• Improving your laboratory''''s competitiveness
• Eliminate waste
• Reduce risk
• Control laboratory methods variations

The first document of the ISO 14644 series was published in 1999 (ISO 14644-1). In 2000, ISO 14644-2 was published, which began the process of FED-STD-209E being canceled. The U.S. General Services Administration (GSA) released a Notice of Cancellation for FED-STD-209E, Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones, on November 29, 2001 and FED-STD-209E was then superseded by ISO 14644-1 and ISO 14644-2.

HACCP Hazard Analysis and Critical Control Point is food industry standard. HACCP is a systematic food safety program developed by the food industry which examines every step in a food processing operation identifies specific hazard, implements effective control measures & monitoring procedures.

The hazard analysis and critical control points (HACCP) certification enables to demonstrate commitment to food HACCP safety and customer satisfaction, as well as continuously meeting the expectations of a changing world.


HACCP is an international principle defining the requirements for effective control of food safety. HACCP compliance/ HACCP certification helps organisations focus on the hazards affecting food safety and hygiene and also identifies them by setting up control limits at critical points during the food production process.


There are clearbenefitsassociated with HACCP-based adoption and certification:

• Enables organizations to demonstrate a commitment to food safety
• Conveys a degree of confidence required by consumers, retailers and buyers within the food industry
• Provides buyers, consumers, government enforcement and trade agencies with justified assurance that control systems are in place to assure the safe production of food
• It is based on the internationally-recognized Codex Alimentarius standards and guidelines and other national standards
• Regular assessments help you to continually monitor their food safety system.

What you will gain:Higher Effectiveness and Efficiency on their Job ExcellentCareer Enhancement OpportunityInternationally Recognized QualificationPhoto-identity Card from ASCB(Europe) Ltd. - UK Listing among an International list of Quality Professionals.
Established in the year 2000, our well definedCertifications Servicesassist in changing work cultures of the organizations as well as in inculcating quality in every sphere of operations involved at client''''s end. Our team of experts also strive towards further improving efficiency as well as profitability of organizations.

The solutions offered by us cover areas likeISO 9001:2008, ISO 10002:2004, ISO 13485:2003, ISO 14001:2004 Certification, ISO/TS 16949:2009 Certification, ISO 17025 Certification, OHSAS 18001:2007 Certification, ISO 20000-1:2005 Certification, ISO 20252:2006 Market Research, ISO 22000 Certification, ISO 27001:2005 Certification, ISO 29001:2007 Oil and Gas, SQC/SPC Certifications and HACCP.

Presently, some of the industries for whom we provide certifications services include Service Industries, Engineering, Pharmaceutical, Chemical, Food, Education, Hospital, Banking & Software and others.

ISO 52000-1:2017 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way.

It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings 'as built', and existing buildings in the use phase as well as renovation.

NOTE Table 1 in the Introduction shows the relative position of ISO 52000-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1:2017.

Management system for private security operations -- Requirements with guidance for use

ISO 18788:2015 provides a framework for establishing, implementing, operating, monitoring, reviewing, maintaining and improving the management of security operations.

It provides the principles and requirements for a security operations management system (SOMS). ISO 18788:2015 provides a business and risk management framework for organizations conducting or contracting security operations and related activities and functions while demonstrating:

a) conduct of professional security operations to meet the requirements of clients and other stakeholders;

b) accountability to law and respect for human rights;

c) consistency with voluntary commitments to which it subscribes.

ISO 18788:2015 is applicable to any organization that needs to:

a) establish, implement, maintain and improve an SOMS;

b) assess its conformity with its stated security operations management policy;

c) demonstrate its ability to consistently provide services that meet client needs and are in conformance with applicable laws and human rights requirements.

Are you willling to start a company that would work as a certification body and offer reviews, audits and certifications of management systems? Then Six Sigma Quality International is the name that can help you the most in this matter. But why Six Sigma Quality International is the best solution for you?

Six Sigma Quality International is a well-recognised company in Mumbai that proposes remarkablesupport related to this ISO17021 accreditation. Our highly skilled specialistteam can put their best effort to help you get ISO 17021: Accreditation For Certification Bodywhich can make you the owner of a legal ISO accrediatedcertification body.

Hence contact Six Sigma Quality International for obtaining this significant accreditation for opening a credible certification body company.

ISO 16707:2016 specifies a procedure for the evaluation and determination of the capacity of a marine evacuation system as required by the International Maritime Organization Life-Saving Appliance Code (LSA Code) and as an alternative to the procedure specified in Resolution MSC.81(70) part 1/12.6.1.

Those who are willing to launch a medical testing laboratory must know that the laboratory you wish to launch has to meet the Management Requirements and Technical Requirements of ISO17025 to beeefficient and to elicit calibration and testing results.In such a context, Six Sigma Quality International is the best suggested name for providing this accreditation.

Six Sigma Quality International is a well-acknowledged company in Mumbai that deliversincredibleassistance related to this ISO17025accreditation. Our highly qualifiedexpert members can look after of every details of the authorization of thisISO 17025 Accreditation For Calibration and Testing Labfor starting a medical testing laboratory.

Hence approach Six Sigma Quality International for acquiring this crucial accreditation for opening a pathology lab with necessary legal permissions.

ISO 16239:2013 specifies the material, metric series nominal diameters, diameter tolerances, and designation for screw thread measuring wires.

ISO 16239:2013 is applicable to measure the pitch diameters of ISO general purpose metric screw threads (M), Unified screw threads (UN), Whitworth pipe threads (G, R), and ISO metric trapezoidal screw threads (Tr) with standard pitches. These wires are intended for use on screw threads with a small lead angle, less than 5, and mainly used to calibrate the pitch diameters of thread plug gauges.

ISO/IEC 17000:2004 specifies general terms and definitions relating to conformity assessment, including the accreditation of conformity assessment bodies, and to the use of conformity assessment to facilitate trade. A description of the functional approach to conformity assessment is included as a further aid to understanding among users of conformity assessment, conformity assessment bodies and their accreditation bodies, in both voluntary and regulatory environments.

ISO/IEC 17000:2004 does not set out to provide a vocabulary for all of the concepts that may need to be used in describing particular conformity assessment activities. Terms and definitions are given only where the concept defined would not be understandable from the general language use of the term or where an existing standard definition is not applicable.

ISO/TR 17068:2012 details the authorized custody services of a Trusted Third Party Repository (TTPR) in order to ensure provable integrity and authenticity of the clients'' digital records and serve as a source of reliable evidence.

It describes the services and processes to be provided by a TTPR for the clients'' digital records during the retention period, to ensure trust. It also details the criteria of "trustworthiness" and the particular requirements of TTPR services, hardware and software systems, and management.

ISO/TR 17068:2012 has the limitation that the authorized custody of the stored records is between only the third party and the client.

The Food Standards Agency (FSA) are no longer sending out hard copies of any Safer food, better business documents to businesses within England, all the documents are now only available from their website. These can be found by following the links below for the Diary and the Catering, Retail, Cuisine specific and Childminder packs. The FSA have developed all these in printer friendly versions so you can print them off easily.

You are also now able to type / complete the Safe Method pages online, before printing them off. The website also allows you to save your typed input whilst working your way through the pack which means you do not need to complete all the Cooking, Cleaning, Chilling, Cross-contamination and Management sections in one go. We recommend however that you print off all your completed Safe Method pages and keep a paper copy in a file in your business.

If you require a Diary refill, these are available from the website in 4 week sections. These can be printed off or saved onto your computer to complete as an electronic record. Be aware that if you keep an electronic Diary you need to save each month so that they are readily accessible to staff who are responsible for completing them. They should be easy to access on your computer and in a way that you can easily identify the date e.g. Sfbb Diary 3 Safer food, better business files, including the electronic Diary are accessible for inspection by your Local Authority Food Safety Officer and whenever your food business is trading these files must be readily available on site at all times.

The calibration curve is a plot of how the instrumental response, the so-called analytical signal, changes with the concentration of theanalyte(the substance to be measured). The operator prepares a series of standards across a range of concentrations near the expected concentration of analyte in the unknown. The concentrations of the standards must lie within the working range of the technique (instrumentation) they are using.^[2]Analyzing each of these standards using the chosen technique will produce a series of measurements. For most analyses a plot of instrument response vs. concentration will show a linear relationship. The operator can measure the response of the unknown and, using the calibration curve, caninterpolateto find the concentration of analyte.

Technical Inspection

Why inspect with us?DCS & LL-C(Europe) has available a global network of qualified inspectors. We prefer experience and qualification of the inspector in combination with regular inspections on the production or assembly sited in the field of large assembly and complex equipment inspections. For inspections of simpler products (check of functionality, quantity and packing), we can offer appropriate prices thanks to the network of inspectors in more than 40 countries of the world. As standard with our quotation, we deliver anonymous curriculum vitae of an inspector for the customer to review his/her experience before placing an order. We are always looking for the most feasible inspection while keeping finances in mind. We always review the costs with respect to full customer costs; we also regard the costs for test samples, transport costs, inspector travelling expenses and last but not least the time factor.

When outsourced inspection services are paid off?

Unique assemblies.Surely always when the supplies of unique products are at stake (investment units, constructions, complex equipment). Hence, in cases when no series production products are involved but supplies where extensive financial loss may be suffered due to any error. For a series-produced product, it is always fine to replace the product, however, for a larger project poor quality sub-supplies may result in extra costs related to repairs, time shifting for delivery of the project as well as financial loss of the customer due to delayed launch of operation.
Remote supplier.We have available a global network and our inspectors within he global network are often closer to the manufacturer than the customer representative. We can offer an inspection from one-day visit to permanent or repeated involvement at the manufacturer.
Legislation requirements.We can arrange inspection services such as functional tests, reviews, measurement or completion of the documents and certificates required from competent bodies should the purchased product subject to legislation requirements of the importers country.

Ranges and types of the technical inspection

Check of project completeness. This type of inspection is performed from the draft phase within the inspection of construction or production documentation followed by inspection right during the production, assembly or repairs of technical equipment and the final operation and review tests. For this inspection type, DCS & LL-C(Europe)usually produces an independent inspection procedure submitted for final approval by the customer.

Instrument for declaration of compliance

Declaration on conformity of producer, supplier or operator. For some modules, where declaration on conformity by the producer or supplier is required for checking of compliance (e.g. CE mark), an inspection report from third party is a legitimate document for issuing of the certificate. Use our experience to help the producer, supplier or operator of equipment to find an optimum solution for cooperation from determination of basic requirements, testing up to full inspection services.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer), Western Union

The list of works and services on energy survey:

Energy audit includes the stages of collection and processing of information on the use of energy resources, with a view to obtaining reliable data on the volume of use, indicators of the level of energy efficiency, identify opportunities for savings of energy consumption and to increase productivity.

• Integrated energy inspection (energy audit);
• The instrumental and visual control of the operation processes;
• Thermal diagnostics of the external walling, electrical and mechanical equipment, etc.;
• Development of energy passports and energy saving programs.

Thermal inspection (infrared survey) is not only an effective and reliable way of monitoring, verification and overcome the shortcomings and disadvantages of mechanical and electrical equipment, but also possibility to prevent fire and emergency situation. Infrared diagnostics saves a lot of time and money. You can avoid unnecessary downtime due to equipment failure.

Additional Information:

• Item Code: Energyaudit
• Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), D/P, D/A, Western Union