GST : 27POKPS1396E1Z6
Write a Review
Our Products
Our offered Product range includes 2/2 Way Direct Acting Solenoid Valve, Namur Direct Acting Solenoid Valve, Pulse Solenoid Valve, 2/2 Way Dust Collector Solenoid Valve (Pulse Valve) and 2/2 Way Wet Steam Solenoid Valve.
Direct acting solenoids adhere to simple working principles.They do not use a diaphragm their seal is part of the moving core and they will remain closed even when no pressure is being applied. This is in contrast to a pilot operated valve, which requires some pressure for the valve to stay closed.
Features:
Apulse solenoid valveis a specialized type of solenoid valve designed to release short, powerful bursts of compressed airtypically used in dust collector systems like bag filters. These valves operate by rapidly opening and closing a diaphragm using an electromagnetic solenoid, creating a sharp pulse of air that dislodges dust and debris from filter surfaces
2/2 Way Angle Type Dust Collector Pulse Valve Supplier in Chennai
SpecificationsBody : AluminiumSize Range : 1/2 to 1Diaphragm : NBR / VitonTemperature : up to 80C (High Temperature 125C on Request)Pressure : 0.6 to 8.5 BarCoil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DCCoil Insulation : F ClassCoil Encloser : IP 67Ends : Screwed End
Providing you the best range of 2/2 way pilot operated diaphragm solenoid valve, 2/2 way semi lift diaphragm operated solenoid valve, 2/2 way semi lift diaphragm operated steam solenoid valve, 2/2 way angle type dust collector pulse valve, 2/2 way semi lift diaphragm operated low pressure solenoid valve and 2/2 way piston type high pressure solenoid valve with effective & timely delivery.
A solenoid valve is an electrically controlled valve. The valve features a solenoid, which is an electric coil with a movable ferromagnetic core (plunger) in its center. In the rest position, the plunger closes off a small orifice. An electric current through the coil creates a magnetic field. The magnetic field exerts an upwards force on the plunger opening the orifice. This is the basic principle that is used to open and close solenoid valves.
Providing you the best range of 1" pulse jet angle type dust collector nc valve, 1" uflow pulse jet angle type dust collector nc valve, 1-1/2" pulse jet dust collector valve, 1" pulse jet angle type dust collector valve (nc), 1/2" pulse jet angle type dust collector valve and 1/4" bsp pulse jet angle dust collector valve with effective & timely delivery.
With our several years of successfully providing our clients superior quality products, we have gained proficiency in offering2/2WaySemi Lift Diaphragm Operated Solenoid Valve.
"SN" Offers 2/2 Way Semi Pilot, high performance diaphragm type solenoid valve, for high volume and low pressure application in Air, Gas, Water, Vacuum, Light oil, Corrosive Fluids available in normally closed & normally open design.
Product Type: Solenoid Valve (Normally Closed)
Brand: N-TORK
Model No.: N-MCN50
Port Size: 2" BSP (British Standard Pipe)
Body Material: CF8 (Cast Stainless Steel, equivalent to SS304)
Seat Material: NBR (Nitrile Butadiene Rubber)
Pressure Range: 0 to 7 bar
Coil Voltage: 230V AC
Country of Manufacture: Made in India
CE Certified
This is an electrically operated valve that controls the flow of liquids or gases.
Normally Closed (NC) means: the valve stays closed when not energized, and opens when electrical power is supplied.
Suitable for automation systems, water and air control, and industrial fluid handling.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
N-TORK Solenoid Valve (Normally Closed Type)
Model:N-MCN50
Port Size:2 BSP (British Standard Pipe)
Body Material:CFB (Cast Forged Brass / similar alloy)
Seat Material:NBR (Nitrile Rubber)
Pressure Range:0 to 7 Bar
Operation:Normally Closed (valve remains closed until electrically energized)
Coil Voltage:230V AC
Made in:India
Application:
Designed for controlling the flow of air, water, oil, or other compatible fluids.
Widely used inautomation systems, irrigation, water treatment, HVAC, and industrial fluid control system
Features:
Size : 1/4BSP
Coil Type : IP-68 Weather Proof Coil with Lead Wire
Valve Type : 2/2 way Normally Closed Screwed End
Body Material : SS 304 (CF8)
Pressure Range : 0 to 10 kg/cm2 (bar)
Temperature (Media) : -30 C to 90 C
Seal : Nitrile (NBR)
Media : Suitable for Air, Water, Chemical, Gas, Oil
Other Specification / Data : Check the tabs given below for details
A two-way solenoid valve is an electromechanically operated valve used to control the flow of liquids or gases. This specific model appears to be a pilot-operated diaphragm type, which means it uses line pressure and an internal pilot mechanism to open and close the valve efficiently.
Key FeaturesType: 2-Way Pilot Operated Diaphragm Solenoid Valve
Body Material: CF8 (Stainless Steel 304 equivalent)
Operation: Normally Closed (NC)
Voltage Options: 230V AC / 24V DC (depending on coil)
Connection Type: Threaded or Flanged (depending on model)
Medium: Air, Water, Oil, Steam (depending on sealing material)
Seal Material: NBR / EPDM / Viton (varies by application)
Pressure Range: Typically up to 10 bar
Temperature Range: -10C to 90C (approx.)
Country of Origin: Made in India
Water treatment plants
Air compressor systems
Irrigation control
Industrial automation
Chemical and food processing equipment
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
A solenoid valve is an electrically controlled valve. The valve features a solenoid, which is an electric coil with a movable ferromagnetic core (plunger) in its center. In the rest position, the plunger closes off a small orifice. An electric current through the coil creates a magnetic field. The magnetic field exerts an upwards force on the plunger opening the orifice. This is the basic principle that is used to open and close solenoid valves.
SN the brand, who offers normally open & normally close type high flow diaphragm type solenoid valve for air, water, light oil, gas, light chemical
A solenoid valve is an electrically controlled valve. The valve features a solenoid, which is an electric coil with a movable ferromagnetic core (plunger) in its center. In the rest position, the plunger closes off a small orifice. An electric current through the coil creates a magnetic field. The magnetic field exerts an upwards force on the plunger opening the orifice. This is the basic principle that is used to open and close solenoid valves.
With our several years of successfully providing our clients superior quality products, we have gained proficiency in offering2/2WaySemi Lift Diaphragm Operated Solenoid Valve.
"SN" Offers 2/2 Way Semi Pilot, high performance diaphragm type solenoid valve, for high volume and low pressure application in Air, Gas, Water, Vacuum, Light oil, Corrosive Fluids available in normally closed & normally open design.
Mr. Tosif Nayyum Shekh (SN Engineers)
1st Floor, G.606, A-209, NEBC Corner, Ahire Wadi Jadhav Wadi Road, Chikhali, Pimpri Chinchwad, Pune, Maharashtra - 411062
https://www.sn-engineers.co.in
Share us via
