GST : 27POKPS1396E1Z6
Write a Review
Our Products
We offer the best product range of Inverted Bucket Steam Trap, TD3 Thermodynamic Steam Trap, Ball Float Steam Trap and Thermodynamic Td 3 Steam Traps.
An Inverted Bucket Steam Trap is a mechanical device used to discharge condensate and non-condensable gases from steam systems while preventing steam loss. It operates on the principle of density difference between steam and water.
Inside the trap, there's an inverted bucket connected to a lever and valve. When condensate fills the trap, the bucket sinks, opening the valve to discharge the water. As steam enters, it fills the bucket, making it buoyant and causing it to rise, which closes the valve and stops steam from escaping. A small vent hole at the top of the bucket allows air to escape gradually.
It's known for its rugged design, resistance to dirt and water hammer, and suitability for high-pressure applications. Want to see how it compares to other types of steam traps? I can break that down too
Description:
The TD (Thermodynamic) steam trap operates on the principle of pressure and temperature difference between steam and condensate. It has a simple design—usually a flat disc on a seat inside a chamber.
Main Components:
Body: Typically made of stainless steel or carbon steel, designed to withstand high pressure and temperature.
Disc: Moves up and down based on pressure differences.
Seat: The sealing surface for the disc.
Cover: Houses the disc and provides access for maintenance.
Working Principle:
Condensate Entry: When condensate enters, it lifts the disc, allowing discharge through the outlet.
Steam Arrival: When steam reaches the trap, the pressure above the disc increases rapidly.
Disc Closes: The high-pressure steam above the disc holds it closed until the steam cools and condenses.
Cycle Repeats: Once the steam condenses, pressure drops, the disc lifts again, and the process repeats automatically.
Key Features:
Compact, simple, and robust construction
Suitable for high pressure and high temperature applications
Operates in any position (horizontal or vertical)
No moving parts other than the disc — low maintenance
Resistant to water hammer and vibration
Typical Specifications (for example – TD42 model):
| Type | Thermodynamic Steam Trap |
| Connection | Screwed / Flanged / Socket Weld |
| Size Range | 1/2" to 1" (DN15–DN25) |
| Pressure Range | Up to 42 bar (depending on model) |
| Temperature | Up to 450°C |
| Body Material | Stainless Steel / Carbon Steel |
| Application | Steam mains, tracing lines, process equipment |
Applications:
Steam distribution lines
Steam tracing for pipelines
Drip points
Small process equipment
Steam headers and manifolds
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : as per Qty
SN ENGINEERS offers a high-qualityBall Float Steam Trap, designed to effectively discharge condensate and prevent steam loss. This steam trap is made with durable and corrosion-resistant materials that ensure longevity and reliability in harsh environments.
The Ball Float Steam Trap operates through a simple and efficient mechanism, which utilizes a stainless steel ball that moves freely within the valve body. When condensate accumulates in the trap, the ball floats and closes the valve to prevent steam loss. As the condensate level decreases, the ball sinks, and the valve opens to discharge the condensate.
The compact and lightweight design of the Ball Float Steam Trap makes it suitable for a wide range of applications, including steam mains, steam tracers, and process equipment. It requires minimal maintenance and can be easily installed in any orientation.
In summary, SN ENGINEERS Ball Float Steam Trap is a reliable, low-maintenance, and cost-effective solution for efficient condensate discharge and steam conservation in a variety of industrial settings.
Mr. Tosif Nayyum Shekh (SN Engineers)
1st Floor, G.606, A-209, NEBC Corner, Ahire Wadi Jadhav Wadi Road, Chikhali, Pimpri Chinchwad, Pune, Maharashtra - 411062
https://www.sn-engineers.co.in
Share us via
